v
Introduction
The NT-series Support Tool for Windows (Ver. 4.
j
) is a software package for creating and maintaining
screen data used by OMRON Programmable Terminals. Be sure to read and understand the functions
and performance of the Support Tool before you attempt to use a Programmable Terminal. When using
the Support Tool, be sure to have the manuals for the Programmable Terminal close at hand.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical systems
(an electrical engineer or the equivalent) and computers.
S
Personnel in charge of introducing FA systems into production facilities
S
Personnel in charge of designing FA systems
S
Personnel in charge of installing and connecting FA equipment
S
Personnel in charge of managing FA systems and facilities
Notice
This manual provides information required to use the NT-series Support Tool for Windows (Ver. 4.
j
). Be
sure to read this manual before attempting to use the Support Tool, and keep the manual close at hand for
reference during operation.
E
OMRON, 2000
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written per-
mission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because
OMRON is constantly striving to improve its high-quality products, the information contained in this manual is sub-
ject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless,
OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained in this publication.
Trademarks
Microsoft
R
, MS-DOS
R
, Windows
R
and Windows NT
R
are either registered trademarks or Trademarks of Micro-
soft Corporation in the United States and/or other countries.
PLC names of MELSEC FX, A series and FX-2PIF of MELSEC F series are registered trademarks of Mitsubishi
Electric Corporation.
Hewlett-Packard, HP, PCL and Laser Jet are registered trademarks of Hewlett-Packard Company.
