Appendix A
Data Conversion
465
Correcting the NT11, NT21, NT31, NT31C, NT631, NT631C screen data after conversion
If the screen data is converted to the NT21, NT31, NT31C, NT631 or NT631C,
the following modification of the screen data and program is needed according to
the source/destination PT model.
Convert From
Convert To
Modification needed
NT30, NT30C,
NT620S, NT620C,
NT625C
NT31, NT31C,
NT631, NT631C with
“-V1” *1
If image/library is inserted into a lamp/touch switch label or a character
string, modification of screen data is needed. For how to perform the
correction, refer to Correction of image codes (page 472) or Correction
of library codes (page 472).
Word configuration of PT control/notify area differs between the source
and destination PT model. Check the program at the host and make
corrections. For details, refer to Appendix A NT20/30/620 compatible
mode.
If a keyboard screen is used, the size of the keyboard screen frame
needs to be checked/adjusted. For how to perform the correction, refer
to Correction related to keyboard screens (page 468).
NT20S
NT21
Word configuration of PT control/notify area differs between the source
and destination PT model.
Check the program at the host and make corrections. For details, refer
to Appendix A NT20/30/620 Compatible Mode.
Some changes will occur on the screens, such as in the sizes of touch
switches and the positions of objects, check all converted screens and
correct them as necessary.
NT30, NT30C,
NT620S, NT620C,
NT625C
NT31, NT31C,
NT631, NT631C with
“-V2” or “-V3” *2
If a keyboard screen is used, the size of the keyboard screen frame
needs to be checked/adjusted. For how to perform the correction, refer
to Correction related to keyboard screens (page 468).
NT31, NT31C,
NT631, NT631C with
“-V1”
NT31, NT31C,
NT631, NT631C with
“-V2” or “-V3”
Not needed.
NT31, NT31C,
NT631, NT631C with
“-V2”
NT31, NT31C,
NT631, NT631C with
“-V2” or “-V3”
Not needed.
NT21
NT31 with “V2”
Not needed.
NT11S
NT11
Not needed.
*1:
When converting the screen data from NT30/620 series to NT31/631 se-
ries, we recommend converting to NT31, NT31C, NT631, NT631C with
“-V2” using NT30/620 compatible mode. This requires less modification of
screen data and is easy to perform. In this case, check if the system pro-
gram installed in the PT is Ver3.
or Ver 4.
. For details of how to install the
system program, refer to Appendix B System Installer Operation.
*2:
On conversion, check if “NT20/30/620 Compatible Mode” ([PT Configura-
tion] – [PT Type] is selected). (In the default status, the check mark will be
ON when trying to convert screen data from the NT20S, NT30, NT30C,
NT620S, NT620C, and NT625C to the NT21, NT31, NT31C, NT631, and
NT631C with “-V2” or “-V3”.)
Correcting colors
Conversion from monochrome display models to color display models
Colors (black and white) remain as they are after the conversion.
If you want to color the converted data, change or color the data as needed.
