6-3
Section
Alarm
168
message for display in the frequency of occurrence. The display format of the
date/time of occurrence is set for [Info Type]. If the date/time or frequency of
occurrence is displayed, the number of alarm message display characters is
reduced accordingly.
Order Type
Order of Frequency:
Alarm messages are displayed in the order of occur-
rence frequency.
Order of Occurrence:
Alarm messages are displayed in the order of occur-
rence (from the oldest record or from the newest re-
cord). The order in which the alarm messages are
displayed depends on the system memory setting.
Info Type:
If the setting is so made to display the date/time of alarm occurrence, the dis-
play format of the date/time is specified for this item. The setting for this item is
invalid if the date/time is not displayed with an alarm message.
Y/M/D h:m (14 digits)
M/D h:m (11 digits)
h:m (5 digits)
Guidance
Using a line scroll touch switch and a page scroll touch switch, you can scroll
messages in units of a line or a page within the alarm list display area.
With the NT21, NT31, NT31C, NT631, and NT631C, to display a line scroll
touch switch and/or a page scroll touch switch, set a check mark in the check
box for the line scroll touch switch and/or a page scroll touch switch in the Prop-
erty setting dialog box.
With the NT21, NT31, NT31C, NT631, and NT631C, a line scroll touch switch
and a page scroll touch switch are a part of an alarm list element. Therefore,
they cannot be modified as a touch switch. They can be moved only when the
alarm list is modified. To move a line scroll touch switch or a page scroll touch
switch, click the desired touch switch while holding down the Shift key and Ctrl
key. ([Edit Object] from the [Edit] menu (or pop-up menu) and Ins key can also
be used for this operation.)
With NT30, NT30C, NT620S, NT620C, and NT625C, however, a line scroll
touch switch and a page scroll touch switch are independent elements and
their position, size, and label can be changed as required. However, the touch
switch function and the lamp setting should not be changed, otherwise the
switch and the lamp will fail to function correctly.
To display the image/library data, set a check mark in the check box of [Display
Image Lib] in the Property setting dialog box.
The procedure for editing the image/library data display area is shown below.
(1) Specify only the image/library data display area (dotted line frame) while
holding down the Shift key and Ctrl key. (automatically enters to Edit Object
mode)
Green
marks (handles) are displayed surrounding the image/library data
display area.
(2) Specify the display size of the image/library data display area and move it as
desired.
