1-1
Section
What Is Support Tool?
5
NT30/620-compatible mode
Multiple line labels
ON/OFF state labels
Numeral display/string display labels
Device monitor screens
Contrast & brightness adjustment screens
Addition of NT Translation Support Utility
The Translation Support Utility is software that helps in translating a language to
another supported language.
For details, refer to Appendix D NT Translation Support Utility.
I/O comments importing from TAB-delimited text file
For details, refer to 7-7-4 Importing I/O Comments from Tab-delimited Text Files.
Centering the Labels of Lamp and Touch Switches
Only horizontal direction could be centered in previous versions. In this version,
the labels of lamp/touch switches can be centered in both vertical and horizontal
directions.
For details, refer to 6-1-9 Centering the Label of Lamp and Touch Switch.
The Data input string in a string input function touch switch (Only for NT31/631)
The label was used for the input data string in previous versions. In this version, a
different string from the label can be specified as the data input string.
For details, refer to 6-8-3 Character String Input Touch Switch.
Launch the system installer
It is possible to launch the system installer from [Connect]–[Launch System In-
staller] in the menu bar.
Addition of NT30/620 series system programs
The system programs for NT30/620 are included.
Main Differences of V4.6
NT21 New System Program Support
Starting with NTST-EV4.6, the NTST supports creating screen data for the
NT21.
NT31-V2 (System Ver. 3.1) data and NT21 data can be converted for mutual
compatibility.
NT20 data can be converted to NT21 data.
NTST-EV4.6 can transfer screen data to the NT21 in high-speed mode.
Refer to NT21/31/631 Reference Manual for details.
Pick I/O Comments from a CX-Server Database
I/O name in CX-Server data can be used as PT I/O comment.
When a PLC address is defined in the dialog, an I/O comment can be picked up
from CX-Server PLC point data in a cdm file. The “Pick CX-Server point” button
is enabled only when CX-Server is installed.
When the I/O comment table is edited, multiple I/O comment data can be picked
up from CX-Server PLC point data in the cdm file. The “Import” button is enabled
only when CX-Server is installed.
