3-3
Section
Operation of Screen Data (Application) File
46
Menu Bar
→
[File]
→
[New] (creating new application)
Menu Bar
→
[Tools]
→
[PT Configuration] (for modifying)
The PT configuration dialog box has a variety of setting items provided in three
pages.
PT Type page
System page
Control/Notify Area page
PT Type page
The PT Type page is displayed when you click on the [PT Type] tab.
The PT Type page is used to set the hardware configuration of the PT to be
connected.
PT Model
Specify the type of PT to be connected. When you are using the NT31, NT31C,
NT631 or NT631C, refer to the table below to select the correct model according
to the system program being installed.
PT Model
System Program
Ver.1.01
Ver.2.0
Ver.2.1
Ver.3.1 or Ver.4.0
NT31
”NT31”
”NT31-V1”
”NT31-V1(System Ver.2.1)”
”NT31-V2/V3 (System Ver. 3.1)”
NT31C
”NT31C”
”NT31C-V1”
”NT31C-V1(System Ver.2.1)”
”NT31C-V2/V3 (System Ver. 3.1)”
NT631
”NT631”
”NT631-V1”
”NT631-V1(System Ver.2.1)”
”NT631-V2 (System Ver. 3.1)”
NT631C
”NT631C”
”NT631C-V1”
”NT631C-V1(System Ver.2.1)”
”NT631C-V2/V3 (System Ver. 3.1)”
Reference: To check the system program version installed in a PT, display the following
screens:
Version display at the upper right position of PT system menu
PT system menu
Expansion mode
Version display
The the NT20, either ”NT20S” screen data (compatible with previous NT20S) or
”NT20” screen data (with expanded CS/CJ-series PLC data access) can be
used.
The following PT Models are also available: