Omron NT - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 371 / 573

9-3 Section Creating the Sample Data
359
PT Type PT Model NT620C/625C
PLC Vendor OMRON
Font Type CP437
Comments SAMPLE DATA
System Initial Screen 1
Backlight OFF Check mark set,
60 min
Resume function Check mark not
set
Number of
Table Entries Numeral Table 512
Table Entries
String Table 256
Bit Memory Table 256
Printer for PT Printer ESC/P
Mode Color
History Setting Alarm (Use Ring Buffer) Check mark set
Buzzer Enable Check mark set,
On Error
Key Input Check mark not
set
After setting the PT configuration items as indicated above, click on .
9-3-4 Setting Memory Tables
Set the memory tables (numeral memory table, character string memory table
(string table), and bit memory table). (Refer to Section 7 Memory Table Setting.)
Opening a table
(1) Select [Tools] (menu bar)
→
[Table].
Setting numeral memory table
(1) Make the numeral memory table settings as shown below.
No. Value Initial Words
PC (PLC)
Address
I/O
Comments
Ref
0 0 1 D00000 Mtr: Num.disp.1 ––
1 0 2 D00001 Mtr: Num.disp.2 ––
2 0 1 D00003 Mtr: Trd.graph 1 ––
3 0 1 D00004 Mtr: Trd.graph 2 ––
4 0 1 D00005 Mtr: Bar graph 1 ––
5 0 1 D00006 Mtr: Bar graph 2 ––
––
10 0 2 D00010 Set: Num.input 1 ––
11 0 2 D00012 Set: Num.input 2 ––
12 0 1 D00014 Set: Thumbwheel ––
Setting character string memory table
(1) Click on [String].