Appendix C
NT Transfer Utility
492
Before installing
To install the NT Transfer Utility in the personal computer without a CD-ROM
drive, make the floppy disks for installation beforehand following the procedure
below.
Equipment to prepare
2 floppy disks (3.5 inch 1.44 Mbytes 2HD, formatted)
Creating installation FD
Copy the contents in the following folder of the Support Tool (CD-ROM) to FDs.
– The contents of [disk1] folder in [Transfer Utility] folder
→
To the first installation disk
– The contents of [disk2] folder in [Transfer Utility] folder
→
To the second installation disk
Reference: If the personal computer has a CD-ROM drive, the install program can be
executed from the CD-ROM of Support Tool directly.
Installation
To install the NT Transfer Utility, execute the install program that is in your soft-
ware package.
Reference: The basic operation of the install program is same as the install program of the
Support Tool. Refer to 2-2-1 Basic Installation Operation.
Procedure
(1) Start up Windows.
(2) If your media is FD, set the first FD of the system disks in drive A (or other 3.5
inch FD drive)
If you are using CD-ROM, set the Support Tool CD-ROM in the CD-ROM
drive while holding down the Shift key to prevent the Support Tool setup pro-
gram from starting up. (Release the Shift key after CD-ROM is recognized
and the access to the CD-ROM is stopped.) If the Support Tool setup pro-
gram is automatically started, click on
to abort it.
Reference: You can execute the setup program by double clicking Setup.exe for NT Transfer
Utility in the Support Tool system disk by displaying the Windows Explorer. In this
case, steps 3, 4 and 5 bellow can be skipped.
(3) Click on the Start button of Windows and select “Run...”