Oki ES9160, Maintenance Manual

Page: 858 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 26
Notes:
• The display of items on this screen varies depending on the types of data written on the USB media.
Each item is displayed only when each data file is written on the USB media in the following
conditions.
• If the USB media are not recognized properly, “USB device Not detected” message is displayed. In
this case, disconnect the USB media and connect again within 3 minutes, or shut down the
equipment and connect the device properly. Then repeat the procedure from (4).
• If any of the error messages below is displayed, confirm if the data file in the USB media is correct.
Then repeat the procedure from (4).
(6) Select the item with the digital keys.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item.
Item Condition
1. SYSTEM FIRMWARE(OS Data) T160SFPWxxxx.tar is written. (xxxx is version.)
2. SYSTEM SOFTWARE (HD Data) T160HDPWxxxx.tar is written. (xxxx is version.)
Error
number
Error message Cause
01 Error Loadmodule Module loading failed.
02 Machine Model Get Error Model information was not
downloaded.
03
Copy Data with valid signature in USB
Storage Checking of data file failed.
04 Other models ROMDATA TXXXXXXXX
* The version name comes at
“xxxx.xxx.x”.
Master data of other model are
stored.
05 Copy Signature File in USB Storage Data files are not stored in the USB
media.
06 Patch and Normal package in one folder
of USB Storage When both the system and patch
update packages are in the USB
media
Item Remarks
1. SYSTEM FIRMWARE(OS Data) Updating OS Data
2. S YSTEM SOFTWARE (HD Data) Updating Master data