Oki ES9160, Maintenance Manual

Page: 662 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 182
[F106_5] ADI-HDD error: Authentication data transmission error
[F109_0] Key consistency error (Consistency check operation error)
Classification Error item
Other service call
ADI-HDD error: The transmission of authentication data fails.
Check Item Measure
Setting Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
• In case this error occurred after returning SRAM data for
SRAM cloning:
Copy the ADI-HDD encryption key from FROM to
SRAM.
(1) Start the equipment in the 3C mode: [3] + [C] +
[POWER]
(2) The authentication menu is displayed. Press [OK].
(Not required in the default setting)
(3) Select "5. Key Backup Restore" and then press the
[START] button.
(4) Select "6. ADIKey FROM to SRAM" and then press
the [START] button.
(5) After the restoring of the encryption key has
completed, "Operation Complete" is displayed.
(6) After the operation has completed, shut down the
equipment by pressing the [POWER] button.
Classification Contents
Other service call Key consistency error - Key consistency check on each key
data fails.
Check Item Measure
Setting Reboot the equipment.
If it cannot be recovered, reinstall the software in the following
procedure.
(1) Install the OS data.
P. 11-9 "11.2.1 Master data/System ROM/Engine
ROM/Scanner ROM / RADF ROM"
(2) Reinstall the master data and application program.
P. 9-9 "9.2.3 Precautions and procedures when
replacing the HDD"
[E] Replace / Format HDD (Step (3) and later in [E]
Replace / Format HDD)
"