Oki ES9160, Maintenance Manual

Page: 409 / 1087

6
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6 - 101
[ 2 ] Reseting procedure
The setting values which are set in P. 6-95 "[ 1 ] Adjusting procedure"can be reset with the following
steps.
(1) Turn OFF the power of the equipment.
(2) Remove 1 screw and take off the board access cover.
(3) Set the SW1 on the Finisher control board as shown in the figures below.
Fig.6-111
(4) Turn ON the power of the equipment while pressing the [0] button and the [8] button
simultaneously.
(5)
Press [Button1] 11 times, press [Button2] once, press [Button1] 11 times , and then press
[Button2] once.
(6) Press [Button1] and [Button2] simultaneously.
(7)
Turn OFF the power of the equipment.
(8)
Turn OFF all bits of SW1 on the Finisher control board as shown below.
Fig.6-112
(9) Install the board access cover with 1 screw.
ON
SW1
1 2 3 4
SW1
[1]
ON SW1
1 2 3 4
ON SW1
1 2 3 4