Oki ES9160, Maintenance Manual

Page: 417 / 1087

6
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6 - 109
[ 1 ] Saddle stapling position adjustment
(1) Turn OFF the power of the equipment.
(2) Remove 2 screws and take off the board access cover [1].
(3) Set the SW1 on the Finisher control board as shown in the figures below.
Turn ON pin 1 and 4.
Fig.6-124
(4) Turn ON the power of the equipment while [0] button and [8] button are pressed simultaneously.
(5) Press [Button 1] on the touch panel 10 times and then press [Button 2] once. Then press [Button
1] once again, and [Button 2] once again. (Adjustment of LD and A3 paper starts.)
Fig.6-125
ON
1 2 3 4
[ 1 ]
LED3 LED2 LED1
Button2 Button1