Oki ES9160, Maintenance Manual

Page: 644 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 164
[CC41] Paper holder cam home position abnormality
MJ-1101
MJ-1106
Check item Measures
Stack transport roller -1
Stack transport roller -2 Rotate the stack transport roller -1 and -2.
Fix any mechanical problem.
Transport motor Check if the connector (CN10) on the finisher controller PC board is
disconnected from the transport motor (M7) and the harnesses are
open circuited. Correct if so.
Parts to be replaced Remark
Transport motor
Finisher control PC board
Classification Contents
Finisher related service call Paper holder cam home position abnormality: The paper holder
cam is not at the home position.
Check Item Measure
Paper holder cam If there is mechanical problem when the paper holder cam is
rotated, fix the mechanism.
Paper holder home position sensor
(S6) Check the connectors and harnesses between the paper holder
home position sensor (S6) and the finisher control PC board
(CN17).
Replacement part Measure
Paper holder home position sensor
(S6)
Finisher controller PC board
Check item Measures
Paper pusher cam Rotate the paper pusher cam.
Fix any mechanical problem.
Paper holder home position
sensor Check if the connector (CN9) on the finisher controller PC board is
disconnected from the paper holder home position sensor (S6) and
the harnesses are open circuited. Correct if so.
Parts to be replaced Remark
Paper holder home position
sensor
Finisher control PC board