Oki ES9160, Maintenance Manual

Page: 865 / 1087

11
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
FIRMWARE UPDATING
11 - 33
[B] Precautions when writing the Engine ROM data
• Clear the buffer of the ROM writer by means of the following settings.
• Set the writing voltage (VID) to 3.3 V.
When an error appears while the data are being written to the download jig, set the writing voltage
(VID) to 12 V and then write them.
• When writing the data, set the address from 0 to 3FFFFF. The data may not be written correctly if it
is not set.
• Load the data file into the buffer by means of the following settings.
[B-1] Engine ROM
Notes:
Be sure not to confuse different ROM Versions since the file name is identical although the ROM
version is different.
From Address To Address Code
0 800000 FF
800000 8000FF 00
Auto Format Detected Binary
From File Normal
To Buffer Normal
From File Address 0
To Buffer Address 300000
Buffer Size 800000
Clear Buffer Before Loading the file Clear buffer with blank state
Rotary Switch File Name Flash ROM
1 T160MWW.xxx ROM1
2 N/A ROM2