Oki ES9160, Maintenance Manual

Page: 395 / 1087

6
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6 - 87
(6) Turn the height adjustment nut [5] of the caster with the wrench to adjust the height of the
Finisher.
(3) Take off the front lower cover (for adjusting
the caster of the equipment side).
(MJ-1033 Service Manual
P.4-9 “[K] Front lower vocer”)
(4) Take off the lower cover (for adjusting the
caster of the movable tray side).
(MJ-1033 Service Manual
P.4-10 “[L] Lower cover”)
(5) Loosen the locking nut [4] of the caster with
the wrench by turning it clockwise.
Fig.6-94
Fig.6-95
Direction to turn the height adjustment nut Height of the Finisher
Clockwise Becomes higher.
Counterclockwise Becomes lower.
(7) The height increases or decreases 1.75 mm
for one turn of the height adjustment nut.
Fig.6-96
[4]
[4]
[4]
[4]
[5]