Oki ES9160, Maintenance Manual

Page: 635 / 1087

8
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8 - 155
[CB83] Saddle main program error
MJ-1106
[CB84] Punch unit main program error
[CB90] Paper folding blade motor (M12) abnormality
MJ-1033
Replace parts Remarks
Finisher control board
Classification Error item
Finisher related service call
Saddle Stitch Finisher - Main CPU program error
Check item Measures
Saddle control PC board • Update the firmware version of the saddle control PC
board (SDL).
• Connector check
• Board check
Replace parts Remarks
Saddle control PC board
Classification Error item
Finisher related service call
Hole Punch Unit - Main CPU program error
Check item Measures
Hole punch control PC board (HP) • Is the firmware version of the PNC board (HP) latest?
• Connector check
• Board check
Replace parts Remarks
Hole punch control PC board
Error Timing of detection
Paper folding blade motor
Paper folding blade home position
sensor The turning OFF of the paper folding blade home position
sensor (S19) is not detected in the specified time when the
paper folding blade is pushing while this sensor is ON.
Turning ON of the paper folding blade home position sensor
(S19) is not detected in the specified time when the paper
folding blade is returned to its home position while this sensor is
OFF.
Paper folding blade motorPaper
folding blade motor clock sensor
The status of the paper folding blade motor clock sensor (S24)
is not changed for the specified time when the paper folding
blade motor (M12) is driven.
Probable cause Checking and measures
Paper folding blade motor (M12)
abnormality Check if the electrical continuity of the coil is normal. If
electricity is not conducted, replace the motor.