Oki ES9160, Maintenance Manual

Page: 904 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 72
11.6 Confirmation of the updated data
After the updating is completed, check each data version in Setting Mode (08) to confirm that the data
were overwritten properly.
The installed ROM versions and the registered optional Electronic License Keys can be confirmed in
the list print mode following the procedure below.
(1) Turn the power ON using the main power switch while pressing the digital key [9] and the
[START] button simultaneously.
*
When the equipment is already in the other setting mode, press the [ON/OFF] button on the
control panel instead of using the main power switch.
(2) Key in “1” three times, and then press the [START] button.
(3) “VERSION LIST” is printed out.
*
It is recommended to keep this list for future reinstallation such as the replacement of the SYS
board.
(4) Keep pressing the [ON/OFF] button until you hear a sound to shut down the equipment.
Firmware Code Remarks
Updating Master data
(HDD program data) 08-8952 HD data external version
08-9900 System software version
Updating System ROM
(OS data) 08-9930 System ROM version
Updating Engine ROM
(Engine firmware) 08-9901 Engine ROM version
Updating Scanner ROM
(Scanner firmware) 08-9902 Scanner ROM version
Updating RADF ROM
(RADF firmware) 08-9903 RADF ROM version
Updating Finisher ROM 08-9904 Finisher ROM version
08-9944 Hole punch unit ROM version
08-9945 Converter board ROM version
Updating FAX ROM 08-9905 FAX ROM version