Oki ES9160, Maintenance Manual

Page: 360 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 52
[B] Adjusting carriages-1 and -2 positions
<Procedure>
(1) Move the carriage-2 toward the exit side.
(2) Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
Fig.6-33
(3) Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
side frame and screw up the front/rear sides of the bracket to fix it.
Notes:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
Fig.6-34
A B
Carriage-2 Pulley bracket
[Rear]
[Front]
Exit side frame
Carriage-1
[Rear] [Front]
Exit side frame
Bracket
Bracket