Oki ES9160, Maintenance Manual

Page: 1052 / 1087

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
mode System Maintenan
ce General 9050 Performing panel
calibration - - SYS Performs the calibration of the pressing position on the
touch panel (LCD screen). The calibration is performed
by pressing 4 reference positions after this code is
started up.
1 Yes
08 Setting
mode System User
interface Screen setting 9051 Panel calibration
setting value 0 0~1 SYS Switches whether the screen for displaying panel
calibration setting values is displayed or not.0: Disabled
(screen not displayed) 1: Enabled (screen displayed)
1 Yes
08 Setting
mode System 9060 Destination display at
SRAM initialization Refer to
content
s
0-255 SYS 0: MJD 1: NAD 2: JPD 3: AUD 4: CND 5: KRD 6:
TWD 7: SAD 8: ASU 9: ASD 10: ARD
<Default value>
MJD: 0 NAD: 1 JPD: 2 AUD: 3 CND: 4 KRD: 5 TWD:
6 SAD: 7 ASU: 8 ASD: 9 ARD: 10
2
08 Setting
mode System HDD 9065 HDD diagnostic menu
display - - SYS Display the HDD information 2 Yes
08 Setting
mode System HDD 9072 Performing HDD
testing - - SYS Checks the bad sector. It may take more than 30
minutes to finish the checking.
3 Yes
08 Setting
mode System General 9081 Initialization of
department
management
information - - SYS Initializing of the department management information
* Key in the code and press the [INITIALIZE] button to
perform the initialization. If the area storing the
department management information is destroyed for
some reason, “Enter
Department Code” is displayed on the control panel
even if
the department management function is not set on. In
this case, initialize the area with this code. This area is
normally
initialized at the factory.
3
08 Setting
mode System Initializatio
n Initialization of NIC
information 9083 Initialization of NIC
information - - SYS Returns the value to the factory shipping default value. 3 Yes
75