Oki ES9160, Maintenance Manual

Page: 272 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
5 - 20
• When a normal HDD is mounted
Fig.5-8
Remarks:
If the HDD type cannot be identified, "Unknown HDD" may appear on the screen.
Refer to
P. 8-180 " [F106_1] ADI-HDD error: HDD type detection error"
Note:
When "SATA HDD" (normal HDD) is displayed, items 1 and 2 are not selectable.
If you select any of 1 and 2 and press the [START] button, the error message below appears.
Fig.5-9
5.10.3 Functions
[A] 1. Revert factory initial status HDD
Select this to dispose of the HDD as well as the equipment.
When this item is selected, all data in the HDD are deleted and the HDD is reverted to its initial status at
the factory shipment.
HDD Assist Mode
Current HDD type: SATA HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
System Firmware Version
Update Mode : xxxx(x.x.x.x)
: 4c Mode
HDD Assist Mode
Current HDD type: SATA HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
System Firmware Version
Update Mode : xxxx(x.x.x.x)
: 4c Mode
=>
Operation Failed.
Press SoftPower Key to Switch Off