Oki ES9160, Maintenance Manual

Page: 478 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
7 - 50
7.10 Maintenance Part List
The parts used for the maintenance of this equipment are as follows.
* "P-I" represents the page item in the Service Parts List.
No.1-13, 15-17 : Refer to "MFP Service Parts List"
No.14 : Refer to "MJ-1101 Service Parts List"
No. Item Purpose
Parts list
<P-I>
1 Door switch jig Used to adjust high-voltage
transformer. 101-1
2 Brush Cleaning inside of the equipment 101-2
3 Doctor sleeve jig Measuring the gap between the
development sleeve and the doctor
blade 101-3
4 Developer material nozzle Pouring the developer material
(attached to the developer bottle) 101-4
5 Wire holder jig Fixing the wire at the assembly of the
carriage wire 101-5
6 Belt tension jig Adjusting the belt tension at the
installation of the scan motor 101-6
7 High-voltage transformer jig Used to adjust high-voltage
transformer. 101-7
8 Downloading jig (DLM board) Updating the scanner/options ROM 102-1
9 Download JIG-2 (6 Flash ROMs) Updating the system/engine ROM 102-2
10 ROM writer adapter (For 1881) Writing the data of PWA-DWNLD-350-
JIG2 102-4
11 ROM writer adapter (For 1931) Writing the data of PWA-DWNLD-350-
JIG2 102-5
12 Drum bag Storing the drum 102-21
13 ROM Installing the DLM board 102-6
14 Harness jig Updating the converter PC board 21-3
15 Patting pawder For photoconductive drum 101-17
16 Color test chart (TCC-2) For test print (A4/LT) 101-22
17 Color test chart (TCC-3) For test print (A3/LD) 101-23