Oki ES9160, Maintenance Manual

Page: 264 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
5 - 12
Procedure 7
* When the automatic adjustment ends abnormally, error message is displayed.
Procedure 10
Procedure 12
Procedure 17
* The automatic adjustment starts when 2 minutes have passed after the [START] button is
pressed.
Notes:
The fuser roller temperature control at the adjustment mode is different from that at the normal
state.
Therefore, the problem of fusing efficiency may be occurred in the test copy at the adjustment
mode. In that case, turn ON the power normally, leave the equipment for approx. 3 minutes after
it has become ready state and then start up the adjustment mode again.
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[START]
( )
Automatic
adjustment
*[CANCEL] or [CLEAR]
[CANCEL]
( )
Stores value
in RAM
[FAX]
(Test copy)
[START]
[OK]
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub code)
[START] [START] [START]
[OK] or [INTERRUPT]
(Value unchangeable)
( )
Value
displayed
[0][5]
[
POWER
]
[Digital key]
(Code)
[START]
[CANCEL]
[CLEAR]
[Digital key]
(key in a value)
([START])
[OK]
or
[INTERRUPT]
(Stores value in RAM)
[POWER]
OFF/ON
(Exit)
[CLEAR]
(Corrects value)
[0][5]
[POWER]
[Digital key]
(Code)
[START]
[UP]
or
[DOWN]
(Adjust a value)
Automatic
adjustment
( )
[UP]
or
[DOWN]
(Adjust a value)
[OK]
or
[INTERRUPT]
Stores value
in RAM
[POWER]
OFF/ON
(Exit)
[FAX]
(Test copy)
[STAR T]
[CANCEL] or [CLEAR]