Oki ES9160, Maintenance Manual

Page: 729 / 1087

8
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8 - 249
[71AD] Failed SCEP operation
[71B0] Software package file decryption failure
[71D0] Factory Default Failure
[71F1] Unsuccessful Creation of Clone File
[71F3] Unsuccessful Import of Clone Data
Check item Measures
Setting File saving failed for some reason. If the error still occurs after
rebooting the equipment, start up using the following
procedure:[3] + [C] + [START]
→
3. HDD formatting
→
Reinstallation of software or HDD replacement
Classification Error item
Maintenance error SCEP operation is failed
Check item Measures
Setting Check SCEP server and the SCEP setting on the TopAccess
menu as follows:
[Administration] > [Security] > [Certificate Management] >
SCEP (Automatic)
Classification Error item
Maintenance error Software package file decryption failed.
Check item Measures
Setting Software package file may have a problem or may be
corrupted. Check the software package file and then
reattempt the installation.
Classification Error item
Maintenance error Factory default setting failed.
Check item Measures
Setting Restart the equipment and then retry.
Classification Error item
Maintenance error
The creation of a clone file failed.
Check item Measures
Setting
Check if there is enough capacity in the HDD and the USB media
and then retry the creation.
Classification Error item
Maintenance error The import of clone data failed.
Check item Measures
Setting The clone file may be invalid. Check the file and then retry the
import.