Oki ES9160, Maintenance Manual

Page: 927 / 1087

[FAX] button: ON/[COPY] button: OFF ([FAX] LED: ON/[COPY] LED: OFF)
Highlighted display Normal display
e.g. e.g.
A Not connected Connected
B Not connected Connected
C - -
D Not connected Connected
E Not connected Connected
F Fuser unit installed Fuser unit not
G fuse disconnected
Other than fuse
disconnection
H - -
A Power ON Power OFF
B Normal Abnormal
C Abnormal rotation Normal rotation
D Abnormal rotation Normal rotation
E - -
F - -
G - -
H - -
A
B
C
When bridge unit is
connected
Paper full detection Full Not full
When job separator
is connected Lower tray paper full
detection
Full Not full
When offset tray is
connected
Paper full detection Full Not full
When bridge unit is
connected Cover
opening/closing
Cover opened Cover closed
When job separator
is connected Cover
opening/closing
Cover opened Cover closed
When offset tray is
connected Cover
opening/closing
Cover opened Cover closed
When bridge unit is
connected
Paper exit sensor Paper present No paper
When job separator
is connected
- - -
When offset tray is
connected
- - -
When bridge unit is
connected Intermediate
transport sensor
Paper present No paper
When job separator
is connected Jam detection
sensor
Paper present No paper
When offset tray is Offset tray timing Paper present No paper
When bridge unit is
connected
- - -
When job separator
is connected Upper tray paper full
detection
Full Not full
When offset tray is Offset tray initial Initial position Other than initial
Items to check
Fuser unit initial detection
-
24 V power supply
-
Bridge unit/Job Separator/Offset Tray
connection detection 1
Bridge unit/Job Separator/Offset Tray
connection detection 2
IPC board connection
MOT board connection
-
Key copy counter connection
Auto-toner sensor connection
Fuser unit connection
E
F
G
H
-
-
[3]
Refer to table 2
Refer to table 2
Refer to table 2
D
Bridge unit/Job Separator/Offset Tray
connection detection 3
Digital
key
Button
Contents
[1]
[2]
High-voltage power supply abnormality
Main motor rotation status (Motor is
rotating in Output Mode (03))
Polygonal motor rotation status (Motor is
rotating in Output Mode (03))
-