Oki ES9160, Maintenance Manual

Page: 394 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 86
6.15.7 Saddle stitch alignment position adjustment
This adjustment is performed in the Adjustment Mode (05-4826) of the equipment.
6.15.8 Gripper arm exiting position adjustment
This adjustment is performed in the Adjustment Mode (05-4827) of the equipment.
6.15.9 Height/skew adjustment
If the height or the skew angle of the Finisher must be adjusted against those of the equipment, follow
the procedure below.
Adjustment scale 0.2mm
Adjustable range -3.0 mm to 3.0 mm
Adjustment direction Increasing the value The alignment plate moves to the center.
Decreasing the value The alignment plate moves to the edge of
paper.
Adjustment scale 0.2mm
Adjustable range -3.0 mm to 3.0 mm
Adjustment direction Increasing the value The gripper arm exiting position moves farther
to the front side.
Decreasing the value The gripper arm exiting position moves farther
to the rear side.
(1) Open the front cover [1].
(2) Remove the screw [2] and the wrench [3].
Fig.6-93
[1]
[2]
[3]