Oki ES9160, Maintenance Manual

Page: 433 / 1087

7
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
PREVENTIVE MAINTENANCE (PM)
7 - 5
7.3 General Descriptions for PM Procedure
Perform the preventive maintenance in the following timing.
•
ES9160 MFP: every 125,000 sheets
• ES9170 MFP: every 150,000 sheets
(1) Preparation
•
Ask the user about the current conditions of the equipment and note them down.
• Before starting maintenance, make some sample copies and store them.
• See the replacement record and check the parts to be replaced in the PM support mode (6S-
2) or list printing mode (9S-103).
6S-2 : [6] + [START] + [POWER] ON [2] [START]
9S-103 : [9] + [START] + [POWER] ON [103] [START]
Fig. 7-1
• Turn OFF the power and make sure to unplug the equipment.
(2) Perform a preventive maintenance using the following checklist and illustrations. Refer to the
Service Manual if necessary.
(3) Plug in the equipment after the maintenance has been finished. Then turn ON the power and
make some copies to confirm that the equipment is working properly.
PM SUPPORT CODE LIST
MM-DD-YY 09:30
UNIT OUTPUT PAGES PM OUTPUT PAGE DRIVE COUNTS PM DRIVE COUNTS
DRUM 81813 150000 119758 220000
DRUM BLADE 81813 150000 119758 220000
GRID 81813 150000 119758 220000
MAIN CHARGER WIRE 81813 150000 119758 220000
SEPARATION FINGER (DRUM) 81813 150000 119758 220000