Oki ES9160, Maintenance Manual

Page: 59 / 1087

3
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
OUTLINE OF THE MACHINE
3 - 21
[ 4 ] Bypass feed copying
1. Insert a sheet of paper into the bypass tray.
→
Bypass paper sensor ON
- “Ready for bypass feeding” is displayed.
2. Press the [START] button
→
“Ready for bypass feeding” changes to “COPYING”
→
Exposure lamp ON
→
Scan motor ON
→
Carriages -1 and -2 move forward
→
Polygonal motor rotates in high speed
→
Main motor and exit motor ON
- The drum, fuser unit, developer unit and exit roller are driven.
3. Bypass feeding
→
Main charger, developer bias and discharge LED ON. Fans are rotated in high speed.
→
Bypass feed clutch ON
- The bypass feed roller start to rotate.
→
Aligning operation
→
Paper reaches the registration roller
→
After a certain period of time, the bypass feed clutch OFF
4. Hereafter, the operation 3) through 6) of P. 3-20 "[ 3 ] Drawer feed copying (Upper drawer paper
feeding)" is repeated.
[ 5 ] Interruption copying
1. Press the [INTERRUPT] button
→
LED “INTERRUPT” ON
→
Copying operation in progress is temporarily stopped. Carriages -1 and -2 return to appropriate
positions.
→
“Job interrupted job 1 saved” is displayed.
→
Automatic density and reproduction ratio 100% are set (The set number remains the same)
2. Select the desired copy condition
3. After the interruption copying is finished:
→
LED “INTERRUPT” OFF by pressing the [INTERRUPT] button
→
Equipment returns to the status before the interruption
→
“Ready to resume job 1” is displayed
4. Press the [START] button
→
The copying operation before the interruption is resumed.