MESH ENGINE OIL FILTER
•
Undo the screw.
•
Remove the mesh filter.
•
Wash the mesh filter in petrol.
•
Blow the filter with a jet of compressed
air.
•
Refit the mesh filter in the oil sump, af-
ter having blown the sump channels
with compressed air.
•
During refitting the oil sump, replace
the gasket with a new one.
See also
Replacement
Gearbox Oil
Inspection
CAUTION
GEARBOX OIL LEVEL MUST BE CHECKED WHEN THE ENGINE IS WARM.
NOTE
RIDE SOME km (miles) TO WARM UP ENGINE OIL
•
Shut off the engine.
•
Keep the vehicle upright with both
wheels on the ground.
•
Undo and remove the dipstick opening
(1) located on the right side of the gear-
box.
•
The level is correct if the oil is close to
the hole of the dipstick (1).
If necessary:
•
Top-up with oil until it reaches the dip-
stick opening (1).
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO
THE FLUID. WHEN USING A FUNNEL OR ANY OTHER EL-
EMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
California EV V1100
Maintenance
MAIN - 31
Summary of Contents for California EV V1100
