Minolta Di250f Operator'S Manual Download Page 298

Page: 298 / 339

14-4

1. If the Following Icons and Alarm Messages Are Displayed

ter

rou

oot

Messages

Causes

Countermeasures

Image data has caused memory
overflow. Your copy job has
been canceled.

Memory is full.

•Retry copying after reducing the

number of document pages.

•If there are some documents

waiting to be printed, print out
first the documents already
saved in the memory.

Memory is full.

•Reserve for transmission after

memory becomes available.

•If there are some documents

waiting to be printed, remove
the documents in the memory.

Original left on the glass.

A document remains on the glass
surface (Book Scanner).

Remove the document from the
glass surface (Book Scanner).

Matching paper size isn’t
available. Reselect paper size.

There is no appropriate paper
size in the paper drawer that
meets document size and scaling
factor currently specified.

•Select the paper. “Selecting the

Copy Paper Size for Copying”

☞

p. 2-5

•Load the paper. “Loading

Paper”

☞

p. 13-2

Matching paper size isn’t
available. Please set matching
paper in the 1st Drawer.

The appropriate paper size is not
installed in the 1st Drawer.

•Load the indicated paper.

“Loading Paper”

☞

p. 13-2

Auto Size mode cannot be used
with the selected paper size.
Please select a zoom ratio.

The scaling factor calculated
from the selected paper size and
the document size is not within
the possible range of 0.250 to
4.000.

•Set the scaling factor. “Selecting

the Zoom Ratios for Copying”

☞

p. 2-9

•Reselect the paper. “Selecting

the Copy Paper Size for
Copying”

☞

p. 2-5

Replenish paper.

There is no paper in the selected
tray.

Load paper. “Loading Paper”

☞

p. 13-2

Please remove paper in Bypass
Tray.

Paper remains on the Manual
Bypass Tray.

Remove the paper from the
Manual Bypass Tray.

This mode cannot be selected
with the Interrupt mode.

A function that does not accept
an interruption is selected.

Reset interruption or function
currently selected.

This mode cannot be selected.
Paper drawer has been
designated as “Not for 2-sided
Copies”.

A paper drawer with paper that
cannot be printed on both sides is
selected for 2-Sided copying.

•Reselect the paper. “Selecting

the Copy Paper Size for
Copying”

☞

p. 2-5

•Cancel 2-Sided copying.

☞

p. 4-16

This mode cannot be selected
with the Duplex mode.

A paper drawer with paper that
cannot be copied on both sides is
selected after 2-Sided copying is
selected.

•Reselect the paper. “Selecting

the Copy Paper Size for
Copying”

☞

p. 2-5

•Cancel 2-Sided copying.

☞

p. 4-16

chapte14.fm Page 4 Thursday, September 16, 1999 8:33 PM

Summary of Contents for Di250f




















































































































































































































































































































































Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands

Minolta Di250f, Operator'S Manual

Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands