Minolta Di250f Operator'S Manual Download Page 240

Page: 240 / 339

10-8

1. Amending User Data

ter

gis

s an

ett

for

Useful Tips
• Output ON:

Touch this to automatically print a
transmission report for each transmission.

• If TX Fail:

Touch this to automatically print a
transmission report only if a document could
be not sent.

• Output OFF:

Touch this to deactivate printing of the
transmission report automatically.

<Setting for the Document Image on the

Report>

• Select

and

touch

• Select

for the document

image on the report, and touch

•

Confirm the registered details once the
screen has returned to the same one as in step
4. Touch

if they are correct.

Useful Tip
Touch the key for the item to be modified, and
re-register.

Touch

repeatedly until the screen

returns to the initial screen.

Report

Report Screen

OFF

Enter

1171P255EA

Enter

Chapter10.fm Page 8 Thursday, September 16, 1999 8:14 PM

Summary of Contents for Di250f




















































































































































































































































































































































Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands

Minolta Di250f, Operator'S Manual

Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands