Minolta Di250f Operator'S Manual Download Page 203

Page: 203 / 339

9-13

9. Settings for Handling the Received Documents

ter

gis

d S

ett

g Ope

rat

ion

<To forward the received document to

another facsimile>

• Touch .
• Select the destination to which the received

document is forwarded.

Useful Tips
• Using the One-touch key to select a

destination:
Touch

, and touch the One-touch

key for the destination to which the received
document is transferred, and then touch

• Using the abbreviated dialing number to

select a destination:
Touch

to select the destination to

which the received document is transferred.

<To print the received document and

forward it to another facsimile>

• Touch .
• Select the destination to which the received

document is forwarded.

Useful Tips
• Using the One-touch key to select a destination:

Touch

, and touch the One-touch

key of the destination to which the received
document is transferred, and then touch

• Using the abbreviated dialing number to

select a destination:
Touch

to select the destination to

which the received document is transferred.

<To save the received document in a

mailbox>

• Touch

, and touch

“Confirming the Communications Status”

☞

p. 5-2

Useful Tip
To print the document, retrieve the received
document via the Activity List screen and touch

<To move the received document to

another user’s mailbox>

• Touch .
• Select the user to which the received

document is moved.
“Confirming the Communications Status”

☞

p. 5-2

Useful Tips
• Touch the key for the user to whom the

received document is moved, or touch

to select the user's number.

• To print, retrieve the received document via

the Activity List screen, and touch

Confirm the setting details when the

screen

returns to the same one as in step 2. Touch

if they are correct.

Useful Tip
To modify, Touch

change the setting.

Touch

repeatedly until the screen

returns to the initial screen.

Forwrd

1171P204EA

One-touch

Enter

Abbr.#

Prt&Forwrd

1171P204EA

One-touch

Enter

Abbr.#

Save to Box

Enter

Print

Move

1171P205EA

User Number

Print

Enter

Received Document

Enter

Chapter9.fm Page 13 Thursday, September 16, 1999 8:08 PM

Summary of Contents for Di250f




















































































































































































































































































































































Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands

Minolta Di250f, Operator'S Manual

Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands