Minolta Di250f Operator'S Manual Download Page 139

Page: 139 / 339

5-3

1. Confirming the Communications Status

ter

ran

ods

Touch

Press

Confirm the transmission status.

Useful Tips
• Touch

and

to retrieve the desired

document and confirm the transmission
status.

• If

is touched while a

document is being scanned or transmitted, an
interim transmission report is printed.

• If

is touched when there is a document

awaiting transmission, transmission is
cancelled.

• If

is touched while the document is

being scanned or transmitted, the action is
suspended.

• If a timer transmission has been set,

displayed to the right of the reception date
and time.

Touch

The initial screen returns.

Touch

Press

Confirm the reception status.

Useful Tips
• Touch

and

to retrieve the desired

document and confirm the reception status.

• When waiting for polling reception, and

is touched, dialing starts

immediately.

• When the document needs to be deleted,

touch

• When the document needs to be transferred,

touch

Touch

The initial screen returns.

Confirming the Transmission Status

Activity List

1171P406EA

1171P118EC

↓

↑

Interim Rep.

Del.

Intrp

Enter

Confirming the Reception Status

Activity List

1171P004EA

1171P119EB

1171P120EC

↓

↑

Retry

Del.

Forwrd

Enter

Chapter5.fm Page 3 Thursday, September 16, 1999 8:00 PM

Summary of Contents for Di250f




















































































































































































































































































































































Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands

Minolta Di250f, Operator'S Manual

Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands