Minolta Di250f Operator'S Manual Download Page 186

Page: 186 / 339

7-12

3. Entering Characters

ter

etti

Touch a character key to enter the character.

Usefull Tips
• To enter capital (uppercase) characters,

touch

before entering the uppercase

characters.

• To enter small characters, touch

before entering the small characters.

• To enter symbols, touch

to display

the symbol key.

• To delete characters, move the cursor over the

character to be deleted and touch

Touch

to move the cursor.

• To clear all characters, press

the

key.

Touch

The characters are registered.

Entering Alphabetic Characters and
Symbols

1171P177EA

Caps

Half

Symbol

Del.

← →

Enter

Chapter7.fm Page 12 Thursday, September 16, 1999 8:05 PM

Summary of Contents for Di250f




















































































































































































































































































































































Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands

Minolta Di250f, Operator'S Manual

Search results

Summary of Contents for Di250f

Reviews:

Brands by name

Popular brands