MAINTENANCE AND SERVICING
DANGER
To avoid bodily injury or death from unexpected
startup of the machine, always stop the engine and
remove the key from the ignition before leaving the
operator’s seat for any reason.
3. Place ground speed lever (GSL) in N-DETENT (A),
shut down engine, and remove key.
Figure 5.206: Ground Speed Lever
CAUTION
Jack stand must be capable of supporting a minimum
of 5000 lb (2268 kg).
4. Place a jack under the leg jack point (A) and raise the
drive wheel until it is slightly off ground. Place a jack
stand beneath the lift cylinder mount (B).
NOTE:
Do
NOT
place jack stand under the cylinder. Use a
small metal plate on top of the jack stand.
5. Lower the windrower onto the jack stand.
Figure 5.207: Drive Wheel Jack Point
Removing Drive Wheel
CAUTION
Use a suitable lifting device capable of supporting a minimum of 2000 lbs (907 kg) to lift the wheel assembly
away from the windrower.
1. Raise the windrower drive wheel (A) off the ground.
Refer to
Raising Drive Wheel, page 415
.
2. Remove the wheel nuts (B).
3. Remove the drive wheel (A).
Figure 5.208: Drive Wheel Assembly
147649
416
Revision A
Summary of Contents for M155
