![background image](http://html.mh-extra.com/html/macdon/m155/m155_operators-manual_685734412.webp)
MAINTENANCE AND SERVICING
Turn Signal Indicators
If the turn signal indicators on the cab display module (CDM) do not function, contact your MacDon Dealer.
Accessing Circuit Breakers and Fuses
The circuit breakers and fuses are located inside a fuse box mounted on the right (cab-forward) side of the
frame under the platform.
The circuit breakers automatically reset. Fuses are the plastic blade type.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
Access the breakers and fuses as follows:
1. Stop engine and remove key.
2. Move right (cab-forward) side platform rearward, refer to
5.3.1 Opening Platforms (Standard Position), page
309
.
3. Remove wing nut (A) and remove fuse box cover (B).
4. Refer to the decal on inside of cover for identi
fi
cation
of fuses and circuit breakers.
5. A cover may be installed over the circuit breaker.
Remove it to access the breaker.
Figure 5.175: Fuse Box
Checking and Replacing Fuses
1. To check fuse, pull fuse (A) out of receptacle and
visually examine.
2. To replace fuse, insert new fuse into receptacle.
IMPORTANT:
Replacement fuses should match rating on decal
shown on
Fuse Box Decal, page 398
.
Figure 5.176: Fuses
147649
396
Revision A
Summary of Contents for M155
