OPERATOR’S STATION
CAUTION
Check to be sure all bystanders have cleared the area.
6. Press and hold the HEADER UP (C) button on the
ground speed lever (GSL).
• CALIBRATING HEIGHT is displayed on the
upper line.
• RAISE HEADER HOLD is displayed on the
lower line.
NOTE:
The word HOLD will
fl
ash during calibration.
RAISE HEADER DONE will display on the lower
line once calibration is complete.
7. Release the HEADER UP (C) button.
• HEIGHT SENSOR CAL is displayed on the
upper line.
• PRESS LOWER HEADER is displayed on the
lower line.
Figure 3.87: Header Height Controls on Ground
Speed Lever
8. Press and hold HEADER DOWN (A) button on GSL.
NOTE:
The word HOLD will
fl
ash during calibration. HT
SENSOR COMPLETE will display on the lower
line once calibration is complete.
9. Release HEADER DOWN (A) button.
• TO CALIBRATE SELECT is displayed on the
upper line.
• HEADER HEIGHT is displayed on the lower line.
10. Press right arrow to select next header sensor
calibration or STOP & EXIT. Press SELECT.
Refer to
Calibrating the Header Tilt Sensor, page 98
or
Calibrating the Header Float Sensors, page 100
.
11. Press PROGRAM to exit Programming Mode.
Figure 3.88: Header Height Controls on Ground
Speed Lever
147649
97
Revision A
Summary of Contents for M155
