OPERATION
Adjusting Reel Only Speed
The A40 reel drive is hydraulically driven. Adjusting reel speed also changes auger speed, unless the auger speed
is initially set at a predetermined value. The following procedure sets the auger speed so that subsequent reel
speed adjustments will only affect the reel.
Figure 4.297: Operator Console
A - Display
B - Header Index
C - Auger Fast
D - Auger Slow
E - Fast
F - Slow
G - Display Selector
IMPORTANT:
To prevent over-speeding the auger, initially set the speed of the reel and auger as follows: Subsequent
adjustments to reel speed do
NOT
affect auger speed.
1. Engage header.
2. Set HEADER INDEX SWITCH (B) to
OFF
.
3. On ground speed lever (GSL) press REEL SLOW switch (F) until a beep is heard.
4. Display (A) shows
##.## REEL RPM
.
5. On cab display module (CDM) press AUGER SLOW (D) or FAST (C) switch to set desired auger speed.
6. Display (A) shows
##.# AUGER SPEED
.
7. On GSL press REEL SLOW (F) or FAST (E) switch to set desired reel speed.
8. Display (A) shows
##.## REEL RPM.
NOTE:
The auger speed will
NOT
change if the reel speed is adjusted.
147649
296
Revision A
Summary of Contents for M155
