MAINTENANCE AND SERVICING
1. Remove the
fi
ve screws (A) securing control panel (B)
to console, remove panel, and store in the tray.
Figure 5.16: Header Control Panel
2. Back off the jam nut (A) and turn nut (B) to either tighten
or loosen the pivot. The nut should be tightened to
snug and then backed off 1/2 turn.
3. Tighten jam nut (A).
4. Check movement of GSL.
Figure 5.17: Header Control Panel
5. Reinstall the control panel (B) with the
fi
ve screws (A).
Figure 5.18: Header Control Panel
Adjusting Ground Speed Lever (GSL) Fore-Aft Movement
The GSL should remain as positioned by the Operator yet be movable without excessive force.
Adjust as follows:
147649
318
Revision A
Summary of Contents for M155
