MAINTENANCE AND SERVICING
1. The battery main disconnect switch (A) is located on
the right cab-forward frame rail beside the batteries.
Ensure battery switch (A) is switched to POWER OFF
position.
2. Open the right cab-forward platform to expose the
batteries. Refer to
5.3.1 Opening Platforms (Standard
Position), page 309
.
3. Remove cable ties securing battery cables to
battery clamp.
Figure 5.127: Battery Switch
4. Position new batteries (G) on dual battery support.
NOTE:
Ensure that batteries are positioned so that the
positive posts (C) face aft.
5. Install strap (F) with bolts (E).
6. Rotate bar (B) into position and secure with bolt (A).
7. Connect battery cables. Refer to
Connecting Batteries,
page 375
.
8. Close the platform. Refer to
5.3.2 Closing Platforms
(Standard Position), page 310
.
Figure 5.128: Battery
Connecting Batteries
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
147649
375
Revision A
Summary of Contents for M155
