MacDon M155, Operator'S Manual

Page: 127 / 510

OPERATOR’S STATION
4. Press SELECT (B) until DWA INSTALLED? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
5. Press right (A) arrow to select YES. Press SELECT (B).
Figure 3.116: M155 DWA Controls
6. SWAP DWA CONTROLS? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
NOTE:
This step swaps the DWA controls from the
console switch to the ground speed lever (GSL)
reel fore-aft buttons.
Figure 3.117: M155 DWA Controls
7. Press right (C) arrow to select YES. Press
SELECT (D).
• DWA AUTO UP/DOWN ? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
NOTE:
If the Operator selects YES, the DWA Auto-Up
function will be activated by the GSL Reel
Fore-Aft button.
8. Press right (C) arrow to select YES. Press
SELECT (D).
9. Press PROGRAM to exit Programming Mode or
press SELECT to proceed to next WINDROWER
SETUP action.
Figure 3.118: M155 DWA Auto Up/Down
147649
111
Revision A