MAINTENANCE AND SERVICING
2. Separate the
fi
lter (B) from the cover (A).
3. Clean or replace the
fi
lter. If cleaning
fi
lter, refer to
Cleaning Return Air Cleaner, page 328
.
4. Assemble the cleaner (B) and cover (A), and position
on cab wall over opening.
Figure 5.40: Return Air Filter
5. Secure
fi
lter assembly (B) to cab wall with knobs (A).
Figure 5.41: Return Air Filter
Cleaning Return Air Cleaner
Clean the electrostatic
fi
lter as follows:
1. Mix a solution of warm water and detergent in a
suitable container so that the
fi
lter (B) can soak for a
few minutes.
2. Agitate to
fl
ush out the dirt.
3. Rinse with clean water,
and then dry with
compressed air.
4. Inspect
fi
lter for damage, separation, and holes.
Replace if damaged.
Figure 5.42: Return Air Filter
147649
328
Revision A
Summary of Contents for M155
