![background image](http://html.mh-extra.com/html/macdon/m155/m155_operators-manual_685734167.webp)
OPERATOR’S STATION
Testing the Double Windrower Attachment (DWA) Drive Activate Function Using the Cab
Display Module (CDM)
IMPORTANT:
Do not over-speed a drive for a significant length of time. Doing so can lead to vibration, belt failures, or
other over-speeding related problems.
NOTE:
• DWA must be attached to windrower and activated under the WINDROWER SETUP menu.
For more
information, refer to
Activating the Double Windrower Attachment (DWA), page 110
.
• Engine
MUST
be running to perform this procedure.
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode. Press
SELECT (C).
• WINDROWER SETUP? is displayed on the
upper line.
Figure 3.209: M155 CDM Programming Buttons
3. Press SELECT (B) until DIAGNOSTIC MODE? is
displayed in upper line.
• NO/YES is displayed on the lower line.
4. Press right (A) arrow to select Yes. Press SELECT (B).
Figure 3.210: M155 Diagnostic Functions
147649
151
Revision A
Summary of Contents for M155
