MAINTENANCE AND SERVICING
3. Remove
fi
lter (A) from tray (B).
Figure 5.36: Fresh Air Filter
Inspecting And Cleaning Fresh Air Filter Element
1. Tap the sides of the
fi
lter element gently to loosen dirt. Do
NOT
tap element against a hard surface.
2. Using a dry element cleaner gun, clean element with compressed air.
IMPORTANT:
Air pressure must
NOT
exceed 60 psi (414 kPa). Do
NOT
direct air against outside of element, as
dirt might be forced through to inside.
3. Hold the air nozzle next to the
fi
lter element’s inner surface and move up and down pleats.
4. Repeat previous steps to remove additional dirt as required.
5. Hold a bright light inside the element and check carefully for holes. Discard any element that shows the
slightest hole.
6. Check outer screen for dents. Vibration would quickly wear a hole in the
fi
lter.
7. Check
fi
lter gasket for cracks, tears, or other signs of damage. If gasket is damaged or missing, replace element.
Installing Fresh Air Filter
Refer to
8.2.4 Filter Part Numbers, page 467
for part
number.
1. Clean tray (B) and interior of
fi
lter housing.
2. Place
fi
lter (A) onto tray (B).
Figure 5.37: Fresh Air Filter
147649
326
Revision A
Summary of Contents for M155
