OPERATION
1.
SLOWLY
return the ground speed lever (GSL) (A) to
NEUTRAL and into N-DETENT.
2. Turn steering wheel until it locks.
3. Move throttle lever (B) to low idle position.
NOTE:
Avoid unnecessary idling. Stop engine if it will be
idling for longer than
fi
ve minutes.
NOTE:
Brakes are automatically engaged when steering
wheel is locked in NEUTRAL position.
IMPORTANT:
Before stopping engine, run at low idle for
approximately
fi
ve minutes to cool hot engine parts
(and allow turbocharger to slow down while engine
oil pressure is available).
4. Turn ignition key counterclockwise to OFF position.
Figure 4.27: Operator Console
4.3.7
Adjusting Caster Tread Width
The rear casters can be adjusted to a narrow tread width to allow loading and shipping without having to
remove them.
A narrow tread width also suits smaller headers by allowing more space to the uncut crop and provides more
manoeuvrability around poles, irrigation inlets, or other obstacles.
A wider tread width is useful in heavy crops that produce large windrows so that runover is reduced.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
CAUTION
Park on a flat, level surface, header on the ground, and the ground speed lever in N-DETENT position and
steering wheel locked.
147649
173
Revision A
Summary of Contents for M155
