MacDon M155, Operator'S Manual

Page: 166 / 510

OPERATOR’S STATION
3. Press SELECT (B) until DIAGNOSTIC MODE? is
displayed in upper line.
• NO/YES is displayed on the lower line.
4. Press right (A) arrow to select Yes. Press SELECT (B).
Figure 3.206: M155 Diagnostic Functions
5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
6. Press right (A) arrow to select YES. Press SELECT (B).
• ACTIVATE HEADER HT is displayed on the
upper line.
Figure 3.207: M155 Functions
CAUTION
Check to be sure all bystanders have cleared the area.
7. Press SELECT (E) until DISC DRV SPD XXXX is
displayed on the upper line.
IMPORTANT:
Do
NOT
over speed the disc drive.
8. Press and hold HAZARD (C) button.
• Press left (B) arrow to
decrease
disc speed.
• Press right (D) arrow to
increase
disc speed.
Verify the disc drive is functioning properly.
9. Release the HAZARD (C) button. The disc drive
will stop.
Figure 3.208: M155 Disc Drive
10. Press PROGRAM to exit Programming Mode or press
SELECT to proceed to next ACTIVATE FUNCTION.
147649
150
Revision A