MAINTENANCE AND SERVICING
NOTE:
Image showing
fi
lter head removed to show
component clarity.
6. Remove gasket (C) from groove (B) in
fi
lter head (A).
Filter (D) shown for context.
Figure 5.192: Return Filter
Installing Return Filter
NOTE:
For
fi
lter speci
fi
cations, refer to
8.2.4 Filter Part Numbers, page 467
.
1. Clean the gasket groove (B) in the
fi
lter head (A).
2. Apply a thin
fi
lm of clean oil to the
fi
lter gasket (C).
3. Install new gasket (C) into the groove (B) in the
fi
lter
head (A).
4. Screw the new
fi
lter (D) onto the
fi
lter head until the
gasket contacts the
fi
lter.
Figure 5.193: Return Filter
5. Tighten
fi
lter an additional 3/4 turn by hand.
IMPORTANT:
Do
NOT
use a
fi
lter wrench to install oil
fi
lter.
Overtightening can damage gasket and
fi
lter.
6. Check hydraulic
fl
uid levels, refer to
Checking and
Filling Hydraulic Oil, page 401
. For capacity level, refer
to
8.2.3 Lubricants, Fluids, and System Capacities,
page 466
.
Figure 5.194: Hydraulic System
147649
406
Revision A
Summary of Contents for M155
