OPERATION
CAUTION
Check to be sure all bystanders have cleared the area.
8. Disengage safety props by turning lever (A) away from
header to raise safety prop until lever locks into vertical
position. Repeat for opposite cylinder.
9. Start engine, choose a level area, and lower header to
the ground.
Figure 4.205: Safety Props
10. Activate header tilt up (A) and header tilt down (B)
cylinder switches on GSL to release load on
center-link cylinder.
Figure 4.206: GSL
11. Stop engine and remove key from ignition.
12. Lift hook release (C) and lift hook (B) off header pin.
NOTE:
If optional center-link self-alignment kit is
installed, lift release (C) and then operate the
link lift cylinder with reel up switch on GSL to
disengage the center-link from the header.
Figure 4.207: Hydraulic Center-Link
147649
252
Revision A
Summary of Contents for M155
