MacDon M155, Operator'S Manual

Page: 303 / 510

OPERATION
IMPORTANT:
Set the minimum draper speed while stationary with the ground speed lever (GSL) in the N-DETENT position.
1. Engage header.
2. Set HEADER INDEX (B) switch to
ON
.
3. Press DISPLAY SELECTOR button (E) until display (A) shows
##.## DRAPER MIN
.
The displayed value (##.##) = draper speed (mph or km/h
20
).
4. Use the FAST (C) and SLOW (D) buttons to set the desired minimum draper speed.
Setting Draper Index
Figure 4.288: Operator Console
CAUTION
Check to be sure all bystanders have cleared the area.
Set draper index as follows:
IMPORTANT:
Draper Index can only be adjusted while operating at a ground speed faster than minimum draper speed plus
header index value.
1. Engage header.
2. Set HEADER INDEX switch (B) to
ON
.
20. Depending on cab display module (CDM) programming.
147649
287
Revision A