MAINTENANCE AND SERVICING
1. Screw the new secondary
fi
lter (A) onto the
fi
lter mount
until the gasket contacts the
fi
lter head.
2. Tighten the
fi
lter an additional 1/2 to 3/4 turn by hand.
IMPORTANT:
Do
NOT
use a
fi
lter wrench to install the
fi
lter.
Overtightening can damage the gasket and
fi
lter.
Figure 5.79: Fuel System
3. Open fuel valve (A) under fuel tank.
4. Prime the fuel system. Refer to
Priming Fuel System,
page 352
.
Figure 5.80: Bottom of Fuel Tank
Draining Fuel Tank
Draining the fuel tank is necessary to remove old or contaminated fuel.
WARNING
• To avoid personal injury or death from explosion or fire, do NOT smoke or allow flame or sparks near
fuel tank when refueling.
• NEVER refuel the windrower when the engine is hot or running.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Stop the engine and remove the key.
2. Open the hood., Refer to
5.2.1 Opening Hood (Lower
Position), page 306
.
147649
349
Revision A
Summary of Contents for M155
