![background image](http://html.mh-extra.com/html/macdon/m155/m155_operators-manual_685734418.webp)
MAINTENANCE AND SERVICING
NOTE:
A sight glass (A) is provided under the hood on the
right side of the tank. It indicates oil level and signs of
contamination. No oil in the sight glass indicates oil level
is below the add mark on the dipstick.
Figure 5.184: Hydraulic Oil Sight Glass
4. Stand on left (cab-forward side) platform to access the
fi
ller pipe.
5. Clean cap (A) and surrounding area.
6. Turn
fi
ller cap (A) counterclockwise to unlock cap and
remove dipstick.
Figure 5.185: M155/M205 Engine Hood
7. If necessary, add oil to maintain a level between the
low (L) and full (H) marks. Refer to
8.2.3 Lubricants,
Fluids, and System Capacities, page 466
for hydraulic
oil speci
fi
cations and quantity.
NOTE:
When dipstick is showing low (L), approximately
1 US gallon (4 liters) is required to reach the full
(H) mark.
IMPORTANT:
• Use new good quality, pre
fi
ltered clean oil
• Exercise care to prevent debris from falling into tank
8. Reinstall dipstick and
fi
ller cap, and turn clockwise to
tighten/lock.
9. Close the hood. Refer to
5.2.2 Closing Hood (Lower
Position), page 307
.
Figure 5.186: Hydraulic Oil Levels
147649
402
Revision A
Summary of Contents for M155
