MacDon M155, Operator'S Manual

Page: 96 / 510

OPERATOR’S STATION
Display (Lower or Upper Line) Description
##.# VOLTS Engine electrical system operating voltage.
SCROLL
SUB-MENU (Lower Line Only)
#### KNIFE SPEED
##.# HEADER HEIGHT
LOAD|
■■■■ | ■■■■ | ####
Displays sub-menu after 2–3 Seconds. Press SELECT to
cancel. Scroll through sub-menu display with CDM switch.
Engine Running, Header Engaged, Auger Header
Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (Lower or Upper Line) Description
#####.# ENGINE HRS Total engine operating time.
#####.# UNIT HRS Total windrower operating time.
#####.# HEADER HRS Total header operating time.
##.# ACRES/HOUR
##.# HECTARES/HOUR (if Metric)
Actual cutting rate in acres (hectares)/hour.
###.# SUB ACRES
###.# SUB HECTARES (if Metric)
Area cut since last reset.
###### TOTAL ACRES
###### TOTAL HECT (if Metric)
Total area cut by machine.
##.## REEL RPM
##.## REEL SENSOR (Flashing) Reel rotational speed. Optional 7
Sensor disabled.
##.# AUGER SPEED Auger rotational speed (4.7–9.9).
#### KNIFE SPEED
#### KNIFE SENSOR (Flashing) Knife speed In strokes per minute. Optional
7
.
Sensor disabled.
##.# HEADER HEIGHT
##.# HEADER SENSOR (Flashing) Distance setting (00.0–10.0) between cutterbar and ground.
Sensor disabled.
##.# HEADER ANGLE
##.# ANGLE SENSOR Angle setting (00.0–10.0) header relative to ground. Optional
7
.
Sensor disabled.
##.# VOLTS Engine electrical system operating voltage.
FUEL| ■■■■ | ■■■■ | Level of fuel in tank.
ENGINE TEMP ### °F
ENGINE TEMP ### °C (if Metric)
Engine coolant temperature.
SCROLL
SUB-MENU (Lower Line Only)
#### KNIFE SPEED
##.# AUGER SPEED
##.## REEL RPM
##.# HEADER HEIGHT Displays sub-menu after 2–3 Seconds. Press SELECT to cancel. Scroll
through sub-menu display with CDM switch.
Knife speed is optional
7
.
Reel rpm is optional
7
.
7. Optional: Available with Expansion Module installation – Whole Goods Bundle MD #B4666.
147649
80
Revision A